LT 1SC Chisel tip, 0,4 mm 0,15 mm 15,0 mm
LT 1SCNW Chisel tip,chrome 0,3 mm 0,1 mm 15,0 mm
LT A Chisel tip, 1,6 mm 0,7 mm 13,5 mm
LT ASL Chisel tip, flat 30° 1,6 mm 0,45 mm 13,5 mm
LT B Chisel tip,(1 piece) 2,4 mm 0,8 mm 13,5 mm
LT BSL Chisel tip, flat 30° 2,4 mm 0,45 mm 13,5 mm
LT H Chisel tip, 0,8 mm 0,4 mm 13,5 mm
LT HSL Flacher Mei?el 30° 0,8 mm 0,4 mm 13,5 mm
LT HHPB Chisel tip 0,8 mm 0,4 mm 13,5 mm
LT AHPB Chisel tip 1.6 mm 0,7 mm 13,5 mm
LT BHPB Chisel tip 2.4 mm 0,8 mm 13,5 mm
LT DHPB Chisel tip 4.6 mm 0,8 mm 13,5 mm
LT C Chisel tip, 3,2 mm 0,8 mm 13,5 mm
LT D Chisel tip 4,6 mm 0,8 mm 13,5 mm
LT DLL Chisel tip, 4,6 mm 0,8 mm 13,5 mm
LT K Chisel tip long, 1,2 mm 0,4 mm 21,0 mm
LT L Chisel tip long, 2,0 mm 1,0 mm 21,0 mm
LT M Chisel tip long, 3,2 mm 1,2 mm 21,0 mm
LT HX Chisel tip bent 30°, 0,8 mm 0,4 mm 18,0 mm
LT ALX Chisel tip bent 30°, 1,6 mm 0,7 mm 18,0 mm
LT BX Chisel tip bent 30° 2,4 mm 0,8 mm 18,0 mm
LT AX Chisel tip bent 30°, 1,6 mm 0,8 mm 13,5 mm
LT 4X Chisel tip bent 30° 1,2 mm 0,4 mm 16,5 mm
LT MX Chisel tip bent 30°, 3,2 mm 0,8 mm 19,3 mm
LT 1S Round tip slim,(1 piece) Ø 0,2 mm 15,0 mm
LT 1SNW Round tip slim,chrome,unwettable, Ø1,0 mm
LT 1SA Round tip slim, Ø 0,5 mm 16,0 mm
LT 1 Round tip, Ø 0,25 mm 14,0 mm
LT 1NW Unwettable, chrome
LT 1A Round tip, Ø 0,5 mm 14,0 mm
LT AS Round tip, Ø 1,6 mm 13,5 mm
LT CS Round tip, Ø 3,2 mm 13,5 mm
LT 1SLX Round tip, slim bent 30° Ø 2,0 mm ? 0,4 mm 20,5 mm
LT 1X Round tip bent 30° Ø 0,4 mm 12,5 mm
LT 4 Round tip sloped 45° Ø 1,2 mm 15,0 mm
LT 4CP Round tip sloped 45° Ø 1,2 mm 15,0 mm
LT 22CP Round tip sloped 45° Ø 2,0 mm 20,0 mm
LT 33CP Round tip sloped 45° Ø 3,0 mm 20,0 mm
LT F Round tip sloped 45° Ø1,2 mm 13,5 mm
LT AA60 Round tip sloped 60°, 1,6 mm 4,0 mm 13,0 mm
LT BB60 Round tip sloped 60° 2,4 mm 4,0 mm 18,0 mm
LT BB45 Round tip sloped 45°, 2,4 mm
LT CC60 Round tip sloped 60° 3,2 mm 6,0 mm 18,0 mm
LT CC45 Round tip sloped 45°, 3,2 mm
LT DD45 Round tip sloped 45°, 4,0 mm 6,0 mm 20,0 mm
LT DD45 Round tip sloped 45°, 4,6 mm 6,0 mm 20,0 mm
LT 1L Conical long, Ø0,2 mm 26,4 mm
LT 1LNW Conical long,chrome,unwettable Ø0,1 mm
LT S Conical long, Ø0,4 mm 21,0 mm
LT T Conical long, Ø0,6 mm 13,0 mm
LT O Conical long, Ø 0,8 mm 17,0 mm
Conical long, Ø 1,0 mm 17,0 mm
Conical long, Ø 1,4 mm 17,0 mm
Conical long, Ø2,0 mm 17,0 mm
LT 1LX Conical long bent, Ø 0,2 mm 26,4 mm
LT GW Gullwing tip 45°, Ø2,3 mm 3,2 mm 18,8 mm
LT GW Gullwing tip 45° Ø 3,5 mm 4,8 mm 18,8 mm
LT KN Knife tip 2,0 mm 6,2mm 16,5 mm
LT KNH Knife tip 2,0 mm 6,2mm 16,5 mm
LT KNS Knife tip 2,0 mm 6,2mm 12,5 mm
LT K Gullwing tip 45° Ø2,0 mm 16,5 mm
LT Measuring tip for Thermoelement, Ø0,5 mm 13,0 mm
LT Screw with M4 outside thread 8,0 mm
1.Strong corrosion resistance
2.Long life span and lead free
3.Not easy to be oxidizing
4.Rohs SGS approved
5.KNOKOO package
7.Applied to soldering station;
8.Lead-free environmental protection,accord with ROSH standards,have SGS lead-free report;
9.Fine workmanship, special shape forming machine to ensure accurate size,by special grinding,the appearance elegant and size uniform;
10.Under temperature 400±20 can reach 40000 solder joints;
11.Tin on and off fluent and uniform;
12.Single original new packaging.
13.Long life circle,it can reach 13-15 cycles (Metal turn over);
14.Plating state high hardness,Hv above 700, usually the heat treatment can be omitted but still have high wear resistance;
15.Strong solder ability,it has the best plating on the market at present;
16.Excellent anti-corrosion effect in alkaline medium;
17.Strong competitiveness in deep plating and uniform plating;
18.Good combination quality and high hardness surface make low phosphorus plating excellent in wear resistance.
Character & advantage:
1. Soldering tips’manufacturer
2. Competitive price.
3. Timely delivery.
4. Free samples offered.
5. We also provide OEM service.
6. High quality and good after service
7. Use special molding machine to process
8. Soldering tip size very precise
9. Welding life span more than 50000 joints
Remind:
Use note1: try to tip in the normal temperature range, as far as soldering, extend tip life.
Use Note 2: After a period of time soldering tip, the surface oxide layer will appear, it is recommended to use special tools to remove, otherwise will cause the phenomenon do not de-soldering tin,tip do not de-soldering tin, with 80% of the factor is related to your use habits .
Use Note3: avoid tip dry, otherwise it will affect life expectancy.
